When a new battery is the likely fix
If your Xbox 360 Wireless Headset is completely dead and won't power on or charge, the battery is a common culprit. In fact, 3 out of 4 wireless headsets that are dead with no power are a bad battery, and replacing it with a new one gives you a 75% chance of fixing the issue.
This guide walks you through replacing the battery yourself using a compatible replacement cell. The process involves soldering two wires, so basic soldering skills are helpful.
The replacement battery you'll need
- NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo: Brand new replacement rechargeable battery for Xbox 360 Wireless Headset, 3.7 volts, 180mAh. This is the exact battery you need to restore power to your headset.

NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo - NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo: Comes with red and black connecting cables for soldering onto the headset's board. You'll use these cables to connect the new battery to your headset.
- NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo: Also replaces the battery in the HALO 3 (green) and Halo Reach (silver) headsets that look identical to the white ones. Confirms compatibility with these special edition headsets.
What you need before you start
Before you begin, gather the following: a replacement battery (like the one linked above), a soldering iron and solder, and a few minutes of time. The installation is straightforward: simply solder the cables onto the board—red to yellow, and black to blue, as shown in the product photos.
Note that the battery you receive will have red and black cables, which replace the original battery's yellow and blue cables. This color change is normal and part of the replacement process.
Step-by-step battery replacement
- Open the headset: Carefully open the headset casing to access the battery compartment. The specific method may vary, so proceed gently to avoid damaging the plastic.
- Remove the old battery: Desolder or cut the old battery's wires, noting the connection points on the board.
- Prepare the new battery: The new battery comes with red and black cables. These will replace the original yellow and blue cables.
- Solder the new battery: Solder the red cable to the yellow connection point on the board, and the black cable to the blue connection point. This matches the instructions: red to yellow, black to blue.
- Close and test: Once soldered, close the headset and charge it. The headset should now power on and hold a charge.
Compatibility check: which headsets this battery fits
This battery is designed for the standard Xbox 360 Wireless Headset (white). It also fits the HALO 3 (green) and Halo Reach (silver) headsets, which are identical in shape and battery requirement. If you have one of these special editions, this battery will work for you.
Product details at a glance
- NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo: Battery specs: 3.7 volts, 180mAh. These are the electrical specifications you need to match for proper function.
- NEW BATTERY for Microsoft Xbox 360 LIVE Wireless Headset rechargeable 180mA halo: Much cheaper than buying a new headset. Replacing the battery is a cost-effective alternative to replacing the entire headset.
Troubleshooting: what if the headset still doesn't charge?
If your headset still won't charge after replacing the battery, double-check your soldering connections. Ensure the red cable is securely soldered to the yellow point and the black cable to the blue point. Also, verify that the battery is properly seated and the headset is reassembled correctly.
If problems persist, the issue may lie elsewhere in the headset, such as the charging port or internal circuitry.


